Grip choice determines which tissues take the load, how force transfers through the fingers, and what type of strength adaptation you get.
Most climbers select grips based on comfort or habit. Effective strength training uses grips that maximise mechanical consistency, stability, and transfer to real climbing.
This article explains what each grip trains — and what it does not train.
1. The Baseline: Why the Half Crimp Is the Primary Strength Grip
The half crimp is the most mechanically stable position for high-force training.
Key anatomy features:
- PIP flexed to ~90°
- DIP slightly flexed, not collapsed
- fingertip pad fully contacting the edge
- force line aligned with flexor tendons
- balanced tension between FDS (PIP flexor) and FDP (full-finger flexor)
Why it’s the best training grip
- high stability
- consistent joint angles
- strong transfer to small-edge climbing
- large involvement of both major flexors
- low rotational torque compared to full crimp
- reduces uncontrolled DIP collapse compared to drag
The half crimp is the standard for finger strength development because it trains the most useful and transferable force pattern.
2. Open Hand (Drag): What It Is and What It Isn’t
The drag feels safe because it distributes load over a large surface.
Mechanically, it is the least effective position for building maximum strength.
Characteristics:
- fingers extended
- large contact surface
- DIP often more flexed than climbers think
- force relies heavily on FDP
- minimal PIP involvement
What drag does train
- high contact friction
- grip security on slopers
- less acute pulley stress
- load distribution across more tissue
What drag does not train
- peak force on small edges
- strong PIP-driven contraction
- mechanical stability under dynamic force
- recruitment of high-threshold units in end-range joint angles
Drag is perfect for sloper performance and some board styles — but is mechanically inferior for developing maximal finger strength.
Use it for skill, not for strength progression.
3. Full Crimp: High Force, High Risk, Low Training Value
The full crimp increases mechanical advantage by stacking the PIP and hyperflexing the DIP.
This shape increases force output but drastically increases pulley stress.
Characteristics:
- PIP deeply flexed
- DIP hyperflexed (tucked)
- thumb wraps over the index finger
What full crimp does mechanically
- increases tendon moment arm
- creates high A2 and A4 strain
- amplifies force spikes under dynamic movement
- produces high apparent strength due to leverage advantages
Why it is a bad primary training grip
- inconsistent joint loading
- extremely sensitive to form breakdown
- high injury potential with minimal progression
- poor load control during isometrics
Full crimp strength should come from improved half-crimp strength, not from training full crimp directly.
The full crimp is a performance grip, not a training grip.
4. Edge Depth: The Hidden Variable That Changes Everything
Edge depth determines tendon torque and joint angles.
A 1–2 mm change can alter mechanical load by 5–10%.
Principles:
- deeper edges = more stable
- shallower edges = higher joint torque
- diminishing returns below ~10 mm
- consistency matters more than depth
- depth progression should follow the 2–5% rule (just like load)
The best training set-up:
- consistent edge (20 mm or 15 mm for most people)
- high-quality wood with uniform friction
- same edge for months before making changes
Progress through intensity, not through rapidly shrinking edges.
5. Grip Symmetry: Left–Right Load Must Match
Uneven loading wrecks connective tissue.
Signs:
- one side peels earlier
- DIP collapse on one hand
- twisting on take-off
- uneven shoulder or scapular tension
- subtle rotation of the torso
The goal is mechanical symmetry:
- identical finger shape left–right
- identical recruitment pattern
- identical force line through the arm
- shoulders locked in mirror positions
Any asymmetry means the training intensity is too high or stability is insufficient.
6. What Grip to Use for Strength Training
Primary training grip:
Half crimp on a consistent edge (15–20 mm).
Secondary choices (to cover movement patterns):
- assisted drag on larger edges for capacity work
- open-hand variations for sloper skill
- slight full-crimp exposure only in climbing, not in hangs
What not to use for strength training:
- dynamic grip switches
- inconsistent edge depths
- unstable or twisting holds
- aggressive full crimp in isolation
7. The Simple Rule
Train strength in the half crimp.
Climb in whatever grip the wall demands.
Strength training builds the engine.
Climbing teaches how to use it.